:: Value Addition
        

About Us
Products
Services
Special Features
Value Additions
Technical Information
Client List
Careers
Download
Contact Us
Home
 
Issued in Public Interest  
Care taken during installation of Elevator  
  • Check weather the Elevator Company has proper govt. authorized license holder of lift as given to PWD lift department.
  • Check weather the Elevator Company is capable of installing. By checking their status in the market. check Co's market reputation.
  • Check weather the Elevator Company has financially strong and has a strong team for erection of lifts.
  • Check weather the Elevator Company has safety items while working like, belts, helmets, safety shoes, etc. and all other instruments for erection.
  • Check weather the Elevator Company is capable of providing maintenance in future.
  • Check weather the Elevator Company having sufficient spares stock.
  • Check weather the Elevator Company proper manufacturer or supplier.
  • Check weather the Elevator Company gives all safeties in elevator.
  • Check weather the Elevator Company given P.W.D. license to use the elevator.
 
How to test the lift after erection  
  • Check whether the lift does not start when the door is open.
  • Check whether the control is off when one phase is not there.
  • Check whether the control gets off automatically when the lift slips 6 inches below the ground level.
  • Check the main safety for free fall.
  • Check whether the Motor takes the proper load as indicated in the capacity load.
  • Check if the lift is inspected by the lift inspector.
  • Lastly get the license of work from the company.
 
Things to be checked in case the lift is not working  
  • Check the power. All three phases should be available.
  • Check whether all the gates are closed properly.
  • Check all the fuses.
  • Check the overload relay and reset it.
  • Check lift in running mode for any noise.
  • If any major noise is coming report co. immediately.
 
Remedies or what should be done if a person gets stuck in the elevator.  
When the lift stops between the floors  
  • Switch off mains supply.
  • Release break system.
  • Give motor dir of up or down of the nearest floor (If possible always give up direction for ease.)
  • At the nearest floor, apply break.
  • Open both the doors.
  • Rescue the person.
  • Contact Elevator co. immediately.
 
If not possible  
  • Switch off main supply.
  • Use locking system to open outside doors.
  • Open car door
  • Rescue the person.
  • Contact Elevator co. immediately.
 
     
Copyright © 2005 by Ikon Engineering & Electricals Co. Pvt. Ltd.